High-Speed Synchronous Motor
170TD50Y80
Ultra-высокоскоростной 80 kW permanent magnet synchronous motor. 50,000 r/min with P4/P2 ceramic hybrid bearings and advanced dual cooling for extreme-performance industrial drive applications.
170TD50Y80 High-Speed Synchronous Motor
The 170TD50Y80 is a state-of-the-art ultra-высокоскоростной permanent magnet synchronous motor designed for the most demanding высокоскоростной industrial drive applications. Delivering 80 kW of continuous power at an exceptional 50,000 r/min, this motor represents the pinnacle of высокоскоростной electric motor technology. The permanent magnet synchronous design обеспечивает superior efficiency, excellent power density, and precise speed control compared to asynchronous alternatives.
P4/P2 ceramic hybrid angular contact шарикоподшипники with silicon nitride (Si3N4) rolling elements are essential for reliable operation at 50,000 r/min, minimizing centrifugal forces and heat generation. An advanced dual cooling system интегрирует a high-capacity water jacket for the motor статор with a precision масляно-воздушная смазка and cooling circuit for the bearings. This combination гарантирует stable thermal conditions during continuous высокоскоростной, high-power operation. Housed in a 170mm diameter frame and weighing approximately 280 kg, the 170TD50Y80 is engineered for integration into высокоскоростной electrospindle drive systems, advanced test rigs, turbo-machinery, and specialized industrial equipment where extreme speed and power density are primary requirements. Every motor is динамически сбалансирован до G0.4 grade and undergoes comprehensive run-out testing before shipment.
Скачать чертеж Запросить ценуDetailed Параметры
| Speed (r/min) | 50000 (max) |
| Диапазон скоростей (r/min) | 10000 - 50000 |
| Мощность (kW) | 80 |
| Крутящий момент (Nm) | 15.3 at номинальная скорость |
| Voltage (V) | 380 |
| Current (A) | 160 |
| Frequency (Hz) | 833 (at max speed) |
| Тип двигателя | Permanent Magnet Synchronous Motor (PMSM) |
| Pole Pairs | 4 |
| КПД | 96% (IE4 equivalent) |
| Тип подшипника | P4/P2 Ceramic Hybrid Радиально-упорные шарикоподшипники (Si3N4 balls) |
| Bearing Arrangement | Tandem-O-Tandem (TBT) with calibrated preload |
| Bearing Смазка | Oil-air micro-lubrication (высокоточный metering system) |
| Охлаждение Method | Двойное охлаждение: водяное (двигатель) + масляно-воздушное (подшипники) |
| Housing Diameter | 170mm |
| Housing Length | ~600mm |
| Масса | ~280 kg |
| Интеграция датчиков | 2x PT100 статор + 1x PT100 per bearing + 1x accelerometer |
| Класс защиты | IP54 |
| Balancing Grade | G0.4 per ISO 1940-1 |
| Mounting | Flange mount with precision pilot diameter |
Доступные опции и конфигурации
- Integrated high-resolution датчик угла поворота for closed-loop speed/position control
- Forced water cooling upgrade for extreme ambient conditions
- Custom вал end configuration (HSK, фланец, keyed, splined)
- Vibration monitoring and diagnostic package
- ATEX-compliant configuration for hazardous environments
- Higher speed variant up to 60,000 r/min (consult factory)
Создано для Extreme-Speed Performance
The 170TD50Y80 combines permanent magnet synchronous motor technology with ceramic hybrid bearings and dual cooling to deliver reliable 50,000 rpm operation.
50,000 rpm Operation
Extreme rotational speed capability for high-performance drive applications.
Permanent Magnet Synchronous Motor
PMSM technology обеспечивает 96% efficiency and precise speed regulation.
80 kW Мощность Density
Exceptional power-to-weight ratio in a compact 170mm frame корпус.
Керамические гибридные подшипники
Si3N4 ceramic balls minimize centrifugal loads for reliable 50,000 rpm operation.
Dual Охлаждение System
Combined water jacket and oil-air cooling for optimal thermal management.
IE4 КПД
96% efficiency снижает energy costs and minimizes heat generation.
G0.4 Precision Balance
Ultra-precise dynamic balancing for minimal vibration at extreme speeds.
Comprehensive Sensor Suite
Multi-point temperature and вибромониторинг for предиктивное обслуживание.
Where the 170TD50Y80 Excels
Разработано для the most demanding высокоскоростной industrial environments where power density and reliability are critical.
High-Speed Electrospindle Drives
Primary motor for advanced CNC electrospindle drive systems requiring extreme rotational speeds and precise speed control.
Advanced Materials Testing
Мощностьs высокоскоростной test rigs for material fatigue, tribology, and component endurance testing at extreme velocities.
Turbo-Machinery & Micro-Turbines
Drive motor for micro-turbines, turbo-compressors, and высокоскоростной blowers in energy and process industries.
High-Speed Compressor Drives
Direct-drive motor for centrifugal and axial compressors in refrigeration, air separation, and gas processing.
R&D Test Stands
Versatile высокоскоростной drive for university and corporate research laboratories developing next-generation rotating machinery.
Specialized Manufacturing
Custom высокоскоростной manufacturing equipment for specialized processes in aerospace, medical device, and precision engineering.
Запросить цену for 170TD50Y80
Сообщите нам о вашем применении requirements and operating conditions. Наша инженерная команда provide a detailed proposal with pricing, ход time, and integration support. 24-hour response guaranteed.