719 Series — лёгкие Радиально-упорные шарикоподшипники
The Industry Standard for Machine Tool Spindle Bearing Arrangements
The 719 series is the most widely specified angular contact шарикоподшипник series for CNC machine tool spindles, offering the optimal balance of compactness, speed capability, and грузоподъёмность. Its light поперечное сечение приспосабливается к multi-bearing spindle arrangements while maintaining excellent dynamic performance across a wide speed range.
719 Series — лёгкие Радиально-упорные шарикоподшипники
The 719 Series — лёгкие Радиально-упорные шарикоподшипники обеспечивает industry-ходing precision and reliability for demanding machine tool spindle applications. Manufactured in our производственный объект с сертификатом ISO 9001:2015 in Luoyang, China — the historic heart of bearing manufacturing — each bearing undergoes rigorous dimensional, running accuracy, and vibration testing before shipment.
The SONGJU B719XX light series is the industry workhorse — the most widely specified angular contact bearing for CNC machine tool spindles worldwide. Its optimized поперечное сечение balances compactness with грузоподъёмность, making it the most versatile choice across the broadest range of spindle applications. The high ball density design packs more rolling elements than heavier-series alternatives of the same bore, обеспечивая higher radial and axial жёсткость — a key advantage in multi-bearing spindle arrangements where load sharing between bearings determines system performance.
The 719 series is available in the widest range of variants of any angular contact series: open or 2RS double-sealed, steel or Si₃N₄ ceramic hybrid balls, standard H высокоскоростной or HQ1 ultra-высокоскоростной configurations, and all three standard класс преднатягаes (лёгкие, средние, Heavy). Bearings are universally face-ground for interchangeable DB/DF/DT mounting without shimming or selective fitting. Precision grades from P5 through P2 ensure the right accuracy-to-cost ratio for every application from general machining to ultra-precision grinding.
719 Series — лёгкие Радиально-упорные шарикоподшипники — Complete Model Параметры
Полный список моделей с α=15° (C) для высокоскоростных и α=25° (AC) для высокожёстких применений. Индивидуальные размеры доступны по запросу.
| Model | d | D | B | α=15° (C) — Высокая скорость | α=25° (AC) — Высокая жёсткость | ||||
|---|---|---|---|---|---|---|---|---|---|
| Cr | C0r | Speed | Cr | C0r | Speed | ||||
| 71907 | 35 | 55 | 10 | 11.0 | 10.9 | 26000/40000 | 10.4 | 10.3 | 20000/34000 |
| 71908 | 40 | 62 | 12 | 14.0 | 14.2 | 20000/34000 | 13.3 | 13.5 | 18000/30000 |
| 71909 | 45 | 68 | 12 | 14.7 | 16.1 | 18000/30000 | 13.9 | 15.2 | 17000/28000 |
| 71910 | 50 | 72 | 12 | 19.0 | 21.2 | 17000/28000 | 17.9 | 20.1 | 15000/24000 |
| 71911 | 55 | 80 | 13 | 23.7 | 27.4 | 15000/24000 | 22.4 | 26.0 | 14000/22000 |
| 71912 | 60 | 85 | 13 | 24.8 | 30.3 | 14000/22000 | 23.3 | 28.7 | 13000/20000 |
| 71913 | 65 | 90 | 13 | 25.1 | 31.9 | 13000/20000 | 23.6 | 30.2 | 12000/19000 |
| 71914 | 70 | 100 | 16 | 34.5 | 43.4 | 12000/19000 | 32.6 | 41.2 | 11000/18000 |
| 71915 | 75 | 105 | 16 | 25.0 | 45.6 | 11000/18000 | 33.0 | 43.2 | 9500/16000 |
| 71916 | 80 | 110 | 16 | 35.5 | 47.8 | 10000/17000 | 33.5 | 45.3 | 9000/15000 |
| 71917 | 85 | 120 | 18 | 46.5 | 61.9 | 9500/16000 | 43.8 | 58.6 | 8500/14000 |
| 71918 | 90 | 125 | 18 | 47.2 | 64.8 | 9000/15000 | 44.5 | 61.4 | 8000/13000 |
| 71919 | 95 | 130 | 18 | 47.9 | 67.8 | 9000/15000 | 45.2 | 64.1 | 8000/13000 |
| 71920 | 100 | 140 | 20 | 60.4 | 84.4 | 8500/14000 | 56.9 | 79.9 | 8000/13000 |
| 71921 | 105 | 145 | 20 | 61.4 | 88.2 | 8000/13000 | 57.8 | 83.5 | 7500/12000 |
| 71922 | 110 | 150 | 20 | 62.3 | 91.9 | 7500/12000 | 58.7 | 87.0 | 7000/11000 |
| 71924 | 120 | 165 | 22 | 73.7 | 107.6 | 7000/11000 | 69.5 | 101.9 | 6700/10000 |
| 71926 | 130 | 180 | 24 | 76.3 | 117.1 | 6700/10000 | 71.9 | 110.9 | 6000/9000 |
| 71928 | 140 | 190 | 24 | 78.9 | 126.4 | 6000/9000 | 74.4 | 119.7 | 5600/8500 |
| 71930 | 150 | 210 | 28 | 118.2 | 175.1 | 5600/8500 | 111.4 | 165.8 | 5000/7500 |
| 71932 | 160 | 220 | 28 | 123.6 | 191.2 | 5000/7500 | 116.5 | 181.1 | 4800/7000 |
| 71934 | 170 | 230 | 28 | 125.7 | 200.0 | 4800/7000 | 118.5 | 189.4 | 4300/6300 |
| 71936 | 180 | 250 | 33 | 159.7 | 249.1 | 4500/6700 | 150.6 | 235.9 | 4000/6000 |
| 71938 | 190 | 260 | 33 | 162.8 | 260.8 | 4300/6300 | 153.5 | 247.0 | 3800/5600 |
| 71940 | 200 | 280 | 38 | 198.4 | 311.4 | 3800/5600 | 187.1 | 294.9 | 3600/5300 |
| 71944 | 220 | 300 | 38 | 206.6 | 341.1 | 3600/5300 | 194.8 | 323.0 | 3200/4800 |
| 71948 | 240 | 320 | 38 | 219.2 | 384.2 | 3200/4800 | 206.7 | 363.8 | 3000/4500 |
| 71952 | 260 | 360 | 46 | 284.6 | 528.8 | 3000/4500 | 268.3 | 500.8 | 2600/4000 |
| 71956 | 280 | 380 | 46 | 288.7 | 554.6 | 2600/4000 | 272.2 | 525.5 | 2200/3600 |
Все модели доступны с P5, P4, and P2 класс точностиs. H-prefix = высокоскоростной variant, HQ1 suffix = ceramic hybrid (Si₃N₄ balls). Phenolic, PEEK, or обработанные латунные сепараторы. Контакты our engineering team for specific preload and arrangement recommendations.
Configuration Options for 719 Series Радиально-упорные шарикоподшипники
Luoyang Songju предлагает множество конструктивных вариантов для всего спектра требований к проектированию шпинделей. Ниже приведены стандартные опции конфигурации available across the 719 series.
Mounting Configuration
Одиночный универсально шлифованный подшипник (U) for individual mounting, or matched sets: Duplex / D (two bearings), Triplex / T (three bearings), Quadruplex / Q (four bearings) in DB, DF, or DT arrangements.
Universal Matching
Прецизионная шлифовка торцов для универсального спаривания. Взаимозаменяемый монтаж любых двух bearings of the same size in DB (back-to-back), DF (face-to-face), or DT (tandem) without shims or selective fitting.
Ball Material
Стандарт: премиальные закалённые стальные шарики GCr15 (100Cr6 / 52100). Гибридный вариант: Si₃N₄ шарики из нитрида кремния — на 40% легче, ниже тепловое расширение, superior высокоскоростной performance.
Sealing Options
Открытый подшипники для масляного тумана или масляно-воздушная смазка systems. 2RS sealed variant with non-contact rubber seals on both sides for grease-lubricated, contamination-protected applications.
Direct Смазка
Опциональная кольцевая смазочная канавка и радиальные масляные отверстия в наружном кольце для прямой подачи масла — обеспечивает надежную смазку на сверхвысоких скоростях.
Преднатяг Classes
Три стандартных уровня преднатяга: лёгкие (L) for maximum speed and minimal heat; средние (M) for balanced жёсткость and speed; Heavy (H) for maximum stiffness in rigid spindle systems.
719 Series Рекомендуемые Configuration
Для оптимальной производительности в general CNC spindle applications, we recommend: средние (M) preload + 15° (C) contact angle + Phenolic cage. For высокоскоростной finishing spindles, substitute лёгкие (L) preload and HQ1 ceramic hybrid balls. For heavy turning centers, substitute 25° (AC) contact angle and Heavy (H) preload.
How to Select 719 Series — лёгкие Радиально-упорные шарикоподшипники
Понимание требований вашего применения — первый шаг к правильному выбору конфигурации подшипника. Ниже приведены ключевые параметры выбора and recommendations for the 719 series.
1 Determine Контакты Angle
Choose for высокоскоростной applications where radial stiffness is the priority. Более низкая осевая жёсткость, но permits significantly higher rotational speeds. Идеально для grinding spindles and высокоскоростной machining.
Выбирайте, когда максимальная осевая жёсткость and combined грузоподъёмность are required. Higher осевая нагрузка capacity suits turning centers, milling spindles, and applications with substantial thrust forces.
2 Select Precision Grade
| Grade | ABEC | Radial Биение (max) | Bore Допуск | Typical Application |
|---|---|---|---|---|
| P5 | ABEC-5 | ≤ 0.004mm | +0 / -0.008mm | Шпиндели станков общего назначения, насосы |
| P4 | ABEC-7 | ≤ 0.002mm | +0 / -0.005mm | CNC обрабатывающие центры, прецизионное шлифование |
| P2 | ABEC-9 | ≤ 0.001mm | +0 / -0.003mm | Ультра-прецизионные шпиндели, КИМ, оптическое шлифование |
3 Choose Bearing Arrangement
4 Specify Преднатяг and Смазка
лёгкие preload (L) — Best for высокоскоростной finishing spindles and grinding applications where thermal stability takes priority over cutting stiffness.
средние preload (M) — Рекомендуемые for 719 Series. The optimal balance for most CNC обрабатывающий центр spindles. Provides sufficient жёсткость for both roughing and finishing while maintaining competitive speed limits.
Heavy preload (H) — Use for turning center spindles and heavy milling applications where cutting forces dominate. Combine with 25° contact angle for maximum axial stiffness.
719 Series Смазка Recommendation: Пластичная смазка (standard, suits most applications up to ~15,000 r/min). Oil-air lubrication recommended for sustained operation above 15,000 r/min. The H and HQ1 высокоскоростной variants with optimized internal geometry provide up to 40% higher speed limits versus standard designs.
Материалы сепараторов, смазка и допуски точности
Подробные технические характеристики для support proper bearing selection and application engineering for 719 Series — лёгкие Радиально-упорные шарикоподшипники.
Cage Material Selection
| Material | Max Operating Temp | Speed Suitability | Best For | Available Series |
|---|---|---|---|---|
| Phenolic Resin | 120°C | High speed | Стандартные шпиндели; легкий вес, низкое трение | 718 / 719 / 70 / 72 |
| PEEK | 250°C | Very high speed | Высокотемпературные шпиндели; высокая химстойкость | 718 / 719 / 70 / 72 |
| Machined Brass | 300°C | Moderate speed | Тяжелые/ударные нагрузки; макс. прочность и долговечность | 70 / 72 (recommended) |
| Polyamide (PA66) | 100°C | Moderate speed | Экономичный; общее промышленное, не шпиндельное применение | 70 / 72 |
Смазка Method Comparison
| Method | Speed Factor (dmN) | Охлаждение | Complexity | Best Application |
|---|---|---|---|---|
| Пластичная смазка | Up to 1.0 × 10⁶ | None | Low | Стандартные шпиндели, периодическое ТО |
| Oil-Mist | Up to 1.5 × 10⁶ | Minimal | средние | Высокоскоростное шлифование, непрерывная работа |
| Масляно-воздушная | Up to 2.0 × 10⁶ | Good | средние-High | Сверхскоростные шпиндели, керамические гибриды |
| Oil-Jet | Up to 2.5+ × 10⁶ | Excellent | High | Максимальная скорость; требуется система рекуперации масла |
| Direct Смазка | +15–20% vs standard | Application-dependent | средние | Оптимизирует подачу через канавку наружного кольца и радиальные отверстия |
Speed factor (dmN) = шаг diameter [mm] × rotational speed [r/min]. Значениеs are indicative — actual limits depend on bearing size, preload, and cage material.
Precision Grade Допуск Table (ISO 492)
| Параметр | Symbol | P5 (ABEC-5) | P4 (ABEC-7) | P2 (ABEC-9) |
|---|---|---|---|---|
| Отклонение отверстия (ном. d ≤ 80mm) | Δdmp | 0 / -8 μm | 0 / -5 μm | 0 / -3 μm |
| Отклонение отверстия (80 < d ≤ 180mm) | Δdmp | 0 / -10 μm | 0 / -7 μm | 0 / -4 μm |
| Отклонение отверстия (180 < d ≤ 250mm) | Δdmp | 0 / -15 μm | 0 / -10 μm | 0 / -5 μm |
| Отклонение НД (ном. D ≤ 150mm) | ΔDmp | 0 / -9 μm | 0 / -6 μm | 0 / -4 μm |
| Отклонение НД (150 < D ≤ 250mm) | ΔDmp | 0 / -13 μm | 0 / -8 μm | 0 / -5 μm |
| Радиальное биение внутреннего кольца | Kia | ≤ 4 μm | ≤ 2 μm | ≤ 1 μm |
| Радиальное биение наружного кольца | Kea | ≤ 5 μm | ≤ 3 μm | ≤ 1.5 μm |
| Axial runout (внутреннее кольцо face) | Sia | ≤ 5 μm | ≤ 3 μm | ≤ 1.5 μm |
| Допуск ширины (все размеры) | ΔBs | 0 / -40 μm | 0 / -25 μm | 0 / -15 μm |
Отрасли и применения for 719 Series — лёгкие Радиально-упорные шарикоподшипники
719 Series — лёгкие Радиально-упорные шарикоподшипники are trusted across a wide range of precision industries worldwide. Ниже приведены основные application areas where the 719 series обеспечивает measurable performance advantages.
CNC Обрабатывающие центры
The industry-standard choice for вертикальных и горизонтальных обрабатывающий центр spindles. Front and задний подшипник sets in DB or DF arrangements with лёгкие or средние preload.
Precision Шлифовальные шпиндели
External and internal grinding spindles requiring P4 or P2 класс точностиs for sub-micron workpiece roundness and surface finish.
CNC Lathes & Turning Centers
Main spindle and sub-spindle bearing arrangements where high жёсткость under radial cutting loads must combine with thermal stability for long production runs.
Milling Spindles
High-torque milling spindles where the 719 series optimized speed-to-load ratio handles both heavy roughing cuts and высокоскоростной finishing passes.
Precision Rotary Axes
Rotary tables, tilting axes, and 5-axis trunnion drives requiring high axial жёсткость and consistent positioning accuracy under динамическая нагрузкаing.
Automotive Assembly Lines
High-volume production spindles in transfer lines and flexible manufacturing cells — 719 bearings deliver the reliability and consistency required for 24/7 operation.
High-Frequency Spindles
Motorized spindles for micro-machining and PCB drilling, where P2-grade 719 bearings with ceramic balls achieve dmN values exceeding 1.8 × 10⁶.
Coordinate Measuring Machines
Ultra-precision rotary axes in CMMs and gear measuring centers demanding the lowest possible radial and axial runout.
Почему выбирают Luoyang Songju 719 Series — лёгкие Радиально-упорные шарикоподшипники
The 719 series is the most widely specified angular contact шарикоподшипник series for CNC machine tool spindles, offering the optimal balance of compactness, speed capability, and грузоподъёмность. Its light поперечное сечение приспосабливается к multi-bearing spindle arrangements while maintaining excellent dynamic performance across a wide speed range.
Most Versatile Series
The industry-preferred choice for обрабатывающий центр spindles, grinding spindles, and precision rotary axes. Доступно в open and 2RS double-sealed variants.
Optimized Speed-to-Load Ratio
Goldilocks поперечное сечение — compact enough for high speeds, robust enough for real cutting loads. Пластичная смазка speed limits up to 26,000 r/min.
High Ball Density
More balls than 72 series for the same bore, providing higher radial and axial жёсткость — a key advantage in multi-bearing spindle arrangements.
Универсальная шлифовка Faces
Precision face-ground for universal matching. Mix bearings freely in DB, DF, DT arrangements without shimming.
H/HQ1 Speed Variants
H-prefix высокоскоростной and HQ1 ceramic hybrid variants provide up to 70% higher speed limits for ultra-высокоскоростной spindle applications.
ISO Interchangeable
Drop-in replacement for NSK, SKF, FAG, NTN, and Timken 719-series precision bearings. Same dimensions, equivalent or better performance.
Нужны 719 Series — лёгкие Радиально-упорные шарикоподшипники?
Tell us your размер отверстия, contact angle, класс точности, класс преднатяга, and quantity — our application engineers will respond within 24 hours with a competitive quotation and detailed technical documentation.