High-Speed Milling Spindle
210XDJ24Y32
High-speed синхронный мотор-шпиндель with ceramic hybrid bearings. 24,000 r/min, 32 kW power, and advanced water plus oil-air cooling for precision высокоскоростной machining.
210XDJ24Y32 High-Speed Milling Spindle
The 210XDJ24Y32 is a precision высокоскоростной синхронный мотор-шпиндель optimized for applications demanding both elevated spindle speeds and substantial metal removal capability. Operating at up to 24,000 r/min with 32 kW of continuous power and 127 Nm of torque, this spindle is ideally suited for высокоскоростной milling of aluminum alloys, composite materials, and finish machining of hardened tool steels.
The permanent magnet synchronous motor обеспечивает excellent speed holding accuracy and rapid acceleration, while P4/P2 silicon nitride (Si₃N₄) ceramic hybrid шарикоподшипники reduce heat generation and extend life at high rotational speeds. A dual cooling system combining a water jacket for the motor статор and масляно-воздушная смазка for the bearings гарантирует stable thermal conditions even during extended высокоскоростной operation. The HSK A63 tool interface поддерживает precise tool positioning at elevated speeds. Housed in a compact 210mm diameter body weighing approximately 180 kg, the 210XDJ24Y32 is designed for высокоскоростной обрабатывающий центрs, graphite machining, and aluminum aerospace component production.
Скачать чертеж Запросить ценуDetailed Параметры
| Speed (r/min) | 24000 |
| Мощность (kW) | 32 |
| Крутящий момент (Nm) | 127 |
| Voltage (V) | 380 |
| Current (A) | 65 |
| Тип двигателя | Синхронный двигатель на постоянных магнитах |
| Интерфейс инструмента | HSK A63 (DIN 69893) |
| Тип подшипника | P4/P2 Ceramic Hybrid Радиально-упорные шарикоподшипники (Si₃N₄ balls) |
| Bearing Arrangement | Tandem-O-Tandem (TBT) with spring preload |
| Bearing Смазка | Oil-air micro-lubrication (standard) |
| Биение Accuracy | ≤ 0.001mm at носик шпинделя |
| Охлаждение Method | Двойное охлаждение: водяное (двигатель) + масляно-воздушное (подшипники) |
| Max Speed Factor (dmn) | 2.0 × 10⁶ mm·r/min |
| Housing Diameter | 210mm |
| Housing Length | ~580mm |
| Spindle Масса | ~180 kg |
| Зажим инструмента | Гидравлическая тяга с преднатягом тарельчатыми пружинами |
| Усилие тяги | 18 kN |
| Интеграция датчиков | 2x PT100 + 1x accelerometer port |
| Класс защиты | IP54 |
| Balancing Grade | G0.4 per ISO 1940-1 |
Доступные опции и конфигурации
- Пластичная смазка lubrication option for reduced system complexity
- Through-spindle coolant capability (up to 50 bar)
- Integrated датчик угла поворота for rigid tapping
- Нестандартный интерфейс инструмента (BT40, HSK A50, HSK E50)
- Drawbar position sensor for ATC verification
- Shaft thermal датчик перемещения for precision compensation
Разработано для High-Speed Precision
The 210XDJ24Y32 combines ceramic hybrid bearing technology with a synchronous motor for superior высокоскоростной machining performance.
24,000 rpm Capability
High-speed operation for small-diameter tools, aluminum machining, and superior surface finishes.
Керамические гибридные подшипники
Si₃N₄ ceramic balls reduce centrifugal force and heat generation at high speeds, extending bearing life.
Dual Охлаждение System
Combined water jacket and масляно-воздушная смазка гарантирует optimal thermal management.
Synchronous Motor
Permanent magnet motor поддерживает constant speed for consistent machining accuracy.
HSK A63 Interface
Hollow-shank tooling standard for высокоскоростной applications with excellent repeatability.
Compact 210mm Housing
Space-efficient design fits высокоскоростной обрабатывающий центр spindles.
G0.4 Balance Grade
Ultra-precise balancing гарантирует minimal vibration at 24,000 rpm.
Advanced Sensor Suite
Temperature and вибромониторинг enable предиктивное обслуживание strategies.
Запросить цену for 210XDJ24Y32
Сообщите нам параметры вашего станка specifications and production requirements. Наша инженерная команда provide a detailed proposal with pricing, ход time, and installation support. 24-hour response guaranteed.
Применения: High-speed обрабатывающий центрs · Aluminum aerospace component production · Graphite electrode machining · Composite material trimming · Mold and die finishing · Automotive aluminum parts