Aerospace
Aerospace precision bearings
Thin-section and stainless bearings for aerospace mechanisms, including inch equal-section rings.
Thin-section bearings
Equal section means that, inside one height series, the cross-section stays the same as the bore changes. Zhongyue's introduction gives a development envelope of width above 3.969 mm and outside diameter below 300 mm. That is a development range, not a stock list.
These bearings are not described as equivalents of another maker's series. Send the inch size, the type, and the load case.


Where they are used
Zhongyue manufactures thin-section and stainless bearings for aerospace-range mechanisms. Inch equal-section thin-section bearings are described on their own page. Songju confirms the model from the designation you send.
Send the section series, the bore, the material, and the duty. Songju will confirm the LYZYC model, specification, and availability. See inch equal-section thin-section bearings.
Bearing set and assembly
Send the section series, the bore, the material, and the duty. Songju will confirm the LYZYC model, specification, and availability. See inch equal-section thin-section bearings.
What to send with the inquiry
Write to jin@luoyangsongju.com with the duty and the bearing you need matched.
jin@luoyangsongju.com- ▸Bearing designation, including the series
- ▸Bore and outside diameter
- ▸Precision grade, P4 or P2 for angular contact, SP or UP for cylindrical roller
- ▸Speed, load direction, and lubrication
- ▸How many bearings are mounted together
Manufacturer quality certificate
Zhongyue’s quality management system is certified to GB/T 19001-2016 / ISO 9001:2015 for the production and sales of bearings. The certificate is held by Luoyang Zhongyue Precision Bearing Co., Ltd. Confirm current validity with the certification body.
- Holder
- Luoyang Zhongyue Precision Bearing Co., Ltd.
- Standard
- GB/T 19001-2016 / ISO 9001:2015
- Registration no.
- 626025Q10519R5
- Issuer
- Kaixin Certification (Beijing) Co., Ltd.
- First issue
- 23 June 2010
- Reissue / valid through
- 30 May 2025 / 7 June 2028
- Scope
- Production and sales of bearings
Machines, metrology, and materials
Special-material stock includes bearing steel ZGCr15, stainless 9Cr18 and 9Cr18Mo, high-nitrogen stainless X30 and X40N, and high-temperature steel M50. Heat treatment includes vacuum quenching and a cryogenic treatment step at −196°C. That step is part of manufacture, not a running-temperature rating.









